Roll over or click to zoom in
Automated operation from rough dozing to finish grade.
Intelligent
New dozing mode, load control performance features.
Integrated
Standard factory installed integrated system.
No Cables
No coiled cables between machine and blade.
No Climbing
GNSS antenna and mast removed from blade.
No Connections
No daily connections required between machine and blade.
Automated Blade Control, from Rough Dozing to Finish Grade. Straight to Grade.
The blade moves to target surface until load reaches a preset level. The blade automatically raises to minimize track slip. Should the load decrease, the blade will lower to re-load the blade to an optimum level.
Accumulator for Electric Proportional Control (EPC)
Air cleaner, dry, double element type with caution lamp on the monitor
Air conditioner (A/C)
Air inlet
Alternator, 24 V/85 A
Back-up alarm
Batteries, large capacity 24 V/92 Ah
Cab Accessories
– 12 V × 2 power supply
– Cup holder
– Rearview mirror
– Rearview monitor system
Crankcase guard and under guard
Decelerator/brake pedal (Single pedal)
Electronically controlled Hydrostatic Transmission (HST) with quick-shift and variable speed settings
Electronic monitor panel with on-board diagnostics
The engine hood and side panels
Engine, KOMATSU SAA4D107E-3, gross output of 98 kW 131 HP, direct injection, water-cooled turbocharged, air-to-air aftercooler, cooled EGR, EPA Tier 4 Final and
EU Stage 4 emissions certified
Fan, hydraulic driven, electronic control
Filler cap locks and cover locks
Foot rest, high mounted
Fuel pre-filter (10 micron) and fuel filter (2 micron)
Grease gun holder
High altitude arrangement (No fuel adjustment up to 2300 m)
Horn
Hydraulics for PAT dozer
Intake pipe with precleaner
Komatsu Diesel Oxidation Catalyst (KDOC)
KOMTRAX Level 5.0
Large high-resolution LCD
Lunch box holder
Marks and plates, English
New Operator Identification System
Palm Command Control System (PCCS) with electronic control for travel control
Palm Command Control System (PCCS) with EPC for blade control
Power turn with counter rotation
Pullhook, front
Radiator guard grid
Radiator reserve tank
Real-time DEF monitoring
Rear-hinged radiator guard
Reverse travel speed presets
ROPS cab
Meets ISO 3471, SAE J/ISO 3471 ROPS standards, and ISO 3449 FOPS standard.
Seat belt, 76 mm 3″ retractable
Seat, air suspension, fabric, heated, low back, headrest
Shovel holder
Starting motor, 24 V/4.5 kW
Selective Catalytic Reduction (SCR)
Self adjusting roller
Sprockets, bolt-on
Sprocket inner guard
Track roller guards, end section
Track shoe assembly (PLUS)
—Sealed and lubricated
D51EXi-24: 560 mm 22″ single grouser shoe
D51PXi-24: 710 mm 28″ single grouser shoe
Triple labyrinth final drive
Water separator
Worklamp (Front 3, rear 2)
Dozer assembly and rear-mounted equipment are not included in base machine price.
Dozer assembly
Hitch
Hydraulics for rear equipment
Track roller guard, full length
| • Multi-shank ripper: Weight 860 kg 1,874 lb
• Beam length: 1556 mm 5’1″ • Maximum lift above ground: 380 mm 1’3″ | • Maximum digging depth: 425 mm 1’8″
• Number of shanks: 3 |
