If you want to perform heavy or accurate fine dozing while sitting in a quiet comfortable cab with unrivaled blade visibility, then you need the D39-24 Crawler Dozer. Equipped with an EPA Tier 4 Final certified engine, this dozer has the cab forward design improved blade response, faster work equipment speed, and an additional “fast-blade mode” that enhances blade speed for high-speed grading. The D39-24 is extremely maneuverable, providing full power to both tracks during turns or counter-rotation steering. It is an ideal choice for any grading or earth-moving applications.
Designed to wear evenly so the machine provides close to 100% usage of undercarriage components, Komatsu PLUS undercarriage lowers undercarriage maintenance costs by up to 40% over a conventional undercarriage. Strengthened rollers and links increase wear life up to two times.
Expand your productivity and gain more versatility in a variety of applications with a power angle tilt (PAT) dozer blade with an adjustable blade pitch system.
An innovative super-slant nose design provides excellent blade visibility for improved machine control and increased efficiency and productivity.
Fully electronic control provides complete automatic shifting and enables smooth control. Equipped with Komatsu-designed HST, this machine allows for Quick-Shift or variable speed selection.
A swing-up fan with a gas strut-assisted lift system provides easy access to the radiator, oil cooler and charge air cooler. The hydraulic fan has a reversing fan for cleaning any objects that are restricting air flow.
Designed for your operator’s comfort and ease of use, the ergonomic, low-effort palm command control system (PCCS) joystick controls all directional movements, including machine travel speed, as well as counter-rotation.
MORE»List: $290,000.00
Automated operation from rough dozing to finish grade.
Intelligent
New dozing mode, load control performance features.
Integrated
Standard factory installed integrated system.
No Cables
No coiled cables between machine and blade.
No Climbing
GNSS antenna and mast removed from blade.
No Connections
No daily connections required between machine and blade.
Automated Blade Control, from Rough Dozing to Finish Grade. Straight to Grade.
The blade moves to target surface until load reaches a preset level. The blade automatically raises to minimize track slip. Should the load decrease, the blade will lower to re-load the blade to an optimum level.
Accumulator for Electric Proportional Control (EPC)
Air cleaner, dry, double element type with caution lamp on the monitor
Air conditioner (A/C)
Air inlet
Alternator, 24 V/85 A
Back-up alarm
Batteries, large capacity 24 V/92 Ah
Cab Accessories
– 12 V × 2 power supply
– Cup holder
– Rearview mirror
– Rearview monitor system
Crankcase guard and under guard
Decelerator/brake pedal (Single pedal)
Electronically controlled Hydrostatic Transmission (HST) with quick-shift and variable speed settings
Electronic monitor panel with on-board diagnostics
The engine hood and side panels
Engine, KOMATSU SAA4D107E-3, gross output of 98 kW 131 HP, direct injection, water-cooled turbocharged, air-to-air aftercooler, cooled EGR, EPA Tier 4 Final and
EU Stage 4 emissions certified
Fan, hydraulic driven, electronic control
Filler cap locks and cover locks
Foot rest, high mounted
Fuel pre-filter (10 micron) and fuel filter (2 micron)
Grease gun holder
High altitude arrangement (No fuel adjustment up to 2300 m)
Horn
Hydraulics for PAT dozer
Intake pipe with precleaner
Komatsu Diesel Oxidation Catalyst (KDOC)
KOMTRAX Level 5.0
Large high-resolution LCD
Lunch box holder
Marks and plates, English
New Operator Identification System
Palm Command Control System (PCCS) with electronic control for travel control
Palm Command Control System (PCCS) with EPC for blade control
Power turn with counter rotation
Pullhook, front
Radiator guard grid
Radiator reserve tank
Real-time DEF monitoring
Rear-hinged radiator guard
Reverse travel speed presets
ROPS cab
Meets ISO 3471, SAE J/ISO 3471 ROPS standards, and ISO 3449 FOPS standard.
Seat belt, 76 mm 3″ retractable
Seat, air suspension, fabric, heated, low back, headrest
Shovel holder
Starting motor, 24 V/4.5 kW
Selective Catalytic Reduction (SCR)
Self adjusting roller
Sprockets, bolt-on
Sprocket inner guard
Track roller guards, end section
Track shoe assembly (PLUS)
—Sealed and lubricated
D51EXi-24: 560 mm 22″ single grouser shoe
D51PXi-24: 710 mm 28″ single grouser shoe
Triple labyrinth final drive
Water separator
Worklamp (Front 3, rear 2)
Dozer assembly and rear-mounted equipment are not included in base machine price.
Dozer assembly
Hitch
Hydraulics for rear equipment
Track roller guard, full length
List: $299,500.00
This machine is a powerful yet nimble 97.2 HP conventional tail swing excavator that is easily transportable. Thoughtfully designed for customers who want durability, reliability and productivity, the PC130LC-11 can handle a wide variety of utility work or small construction jobs while fitting the changing needs of your business as it grows.
Lifting capacity increased up to 20%*> Increased stability with a long undercarriage design Power and agility in a mid-size machine
The PC130LC-11 is nimble and can easily handle a wide variety of utility work or small construction jobs, providing a versatile workhorse for you as your business expands and grows.
Thanks to the long undercarriage design, the PC130LC-11 lifting capacities have increased up to 20% compared to the previous model. This increase can help your business to complete jobs quicker.
High hydraulic pressures help optimize high arm and bucket digging forces for exceptional performance.
Durable steel castings in the boom foot, boom nose and arm tip help spread working loads away from high-stress areas for improved long-term durability.
Reduce fuel consumption with the auto idle shutdown feature that can be set to automatically stop the engine after a preset amount of idle time.
A large one-piece hood, ground-level grease points, engine oil and fuel filters provide quick-and-easy service access.
MORE»List: $247,500.00
The PC45MR-5 hydraulic excavator is an hydraulic excavator with tight tail swing radius and swing boom that hug the machine to help with work in tight spaces. PC45MR-5 uses up to five percent less fuel than its MR-3 predecessors, with no loss of performance or productivity.
The short-tail PC45/55MR-5 delivers optimal power and digging speed, even in confined spaces where traditional machines can’t work: yards, road works, demolition sites, sewers, etc. Sturdy and very stable, it guarantees maximum safety and offers complete operator confidence in any working conditions.
Despite its compact size, the PC45/55MR-5 offers unequalled comfort. The spacious cab was developed with exceptional care to details, and the work environment is quiet and comfortable. Special attention is given to the operator: ergonomic and dedicated PPC controls, and, in option, an efficient air conditioning and ventilation system to guarantee optimal thermal comfort. A much larger cab door makes cab access a lot easier
POWERFUL AND ENVIRONMENTALLY FRIENDLY
• Low consumption EU Stage V engine
• Komatsu fuel-saving technology
• 6 selectable working modes
• Auto-deceleration and idle shutdown
• Dial type fuel control
FIRST-CLASS COMFORT
• Newly designed cab
• Improved operator convenience
• Multi-function monitor with high resolution 3,5” LCD color display
• Multiple accessories around the operator’s seat
MAXIMIZED EFFICIENCY
• Many configurations to suit the job at hand
SAFETY FIRST
• Neutral position detection system
• Emergency engine stop switch
• Seat belt caution indicator
• Large transport tie down points
EASY MAINTENANCE
• Tilting cab
• Wide opening engine hood
• Maintenance information displayed on the monitor KOMTRAX
• Komatsu Wireless Monitoring System
• 4G mobile communications
• Integrated communication antenna
• Increased operational data and reports
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
List: $110,500.00
If you want to perform heavy dozing or accurate fine dozing while sitting in a quiet comfortable cab with unrivaled blade visibility, then you need the D37-24 Crawler Dozer. Equipped with an EPA Tier 4 Final certified engine, this dozer has the cab forward design improved blade response, faster work equipment speed, and an additional “fast-blade mode” that improves blade speed for high-speed grading. The D37-24 is extremely maneuverable by providing full power to both tracks during turns or counter-rotation steering. It is an ideal choice for any grading or earth-moving applications.
Accumulator for Electric Proportional Control (EPC)
Air cleaner, dry, double element type with caution lamp on monitor
Air conditioner (A/C)
Air inlet
Alternator, 24 V/85 A
Back-up alarm
Batteries, large capacity 24 V/92 Ah
Cab Accessories
12 V × 2 power supply
Cup holder
Rear view mirror
Rear view monitor system
Crankcase guard and underguard
Decelerator/brake pedal (Single pedal)
Electronically controlled Hydrostatic Transmission (HST) with quick-shift and variable speed settings
Electronic monitor panel with on-board diagnostics
Engine hood and side panels
Engine, KOMATSU SAA4D95LE-7, gross output of 67 kW 91 HP, direct injection, water-cooled turbocharged, air-to-air aftercooler, cooled EGR, EPA Tier 4 Final and EU Stage 4 emissions certified
Fan, hydraulic driven, electronic control
Filler cap locks and cover locks
Footrest, high-mounted
Fuel pre-filter (10 microns) and fuel filter (2 microns)
Grease gun holder
High altitude arrangement (No fuel adjustment up to 2300 m)
Horn
Hydraulics for PAT dozer
Intake pipe with pre-cleaner
Large high-resolution LCD
Lunch box holder
Marks and plates, English
New Operator Identification System
Palm Command Control System (PCCS) with electronic control for travel control
Palm Command Control System (PCCS) with EPC for blade control
Power turn with counter rotation
Pullhook, front
Radiator guard grid
Radiator reserve tank
Real-time DEF monitoring
Rear-hinged radiator guard
Reverse travel speed presets
ROPS cab Meets ISO 3471, SAE J/ISO 3471 ROPS standards, and ISO 3449 FOPS standard.
Seat belt, 76 mm 3″ retractable
Seat, air suspension, fabric, heated, low back, headrest
Shovel holder
Starting motor, 24 V/4.5 kW
Self-adjusting roller
Sprockets, bolt-on
Sprocket inner guard
Track roller guards, end section
Track shoe assembly (PLUS)
Sealed and lubricated
D37EX-24: 460 mm 18″ single grouser shoe
D37PX-24: 600 mm 24″ single grouser shoe
Triple labyrinth final drive
Water separator
Worklamp (Front 3, rear 2)
Dozer assembly
Hitch
Hydraulics for rear equipment
Track roller guard, full length
Multi-shank ripper (for D37EX only)
Weight……………………………….. 470 kg 1,036 lb
Beam length………………………….. 1569 mm 62″
Maximum lift above ground………… 389 mm 15″
Maximum digging depth……………. 336 mm 13″
Number of shanks……………………………………. 3
400 mm 16″ single grouser (EX)(PLUS)
Model Komatsu SAA4D95LE-7*
Type 4-cycle, watercooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75 x 4.52 in
Piston displacement 199 in³
Governor All-speed, electronic
SAE J1995 - Gross 91 HP
ISO 9249 / SAE J1349 - Net 89 HP
Rated rpm 2,200 rpm
Fan drive type Hydraulic
Dual-path, hydrostatic transmission provides infinite speed changes up to 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)*
Forward Reverse
1st 0–2.1 mph 0–2.5 mph
2nd 0–3.5 mph 0–4.0 mph
3rd 0–5.3 mph 0–5.3 mph
Travel speed (variable mode)
0–5.3 mph 0–5.3 mph
In-shoe mounted, axial-piston-type travel motors, with integrated two-stage planetary gear reduction. Compact, in-shoe mount reduces risk of damage by debris. Bolt-on sprocket ring with triple labyrinth seal design.
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it back reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.
Hydrostatic Transmission (HST) provides smooth, powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 83 in
MORE»List: $264,000.00
What weighs 7,993 lbs., has a powerful Tier 4 final engine, a swinging boom to dig right next to buildings and a blade to backfill after itself? The Komatsu PC35MR-5 of course. Built with the durability of bigger Komatsu excavators, the PC35MR-5 is a powerhouse in a compact package.
MORE»List: $64,900.00
The PC55MR-5 has a maximum track width of only 77” and a tight minimum swing radius, yet delivers outstanding performance in reach, digging depth, bucket break-out force and lifting capabilities. From the high strength X-Track frame to the ample castings in the boom and arm, the PC55MR-5 is made to deliver high performance for years to come.
List: $120,500.00
Small but powerful, the PC30MR-5 is constructed like a big Komatsu excavator with a high strength x-frame, PPC joysticks, pattern change valve but with the addition of a swinging boom, three track option and tight tail swing. If you need versatility in a small package, Komatsu mini-excavators are just what you are looking for.
MORE»List: $60,000.00
Automated Blade Control, from Rough Dozing to Finish Grade. Straight to Grade.
* Dozer assembly and rear mounted equipment are not included in base machine standard equipment
** Cab meets ROPS and FOPS Level 2 standards
List: $230,000.00
